The hood cleaning of an electric car is different from that of a traditional fuel car, and special attention should be paid to the protection of electronic components.
I. Preparation
Before cleaning, you need to prepare:
Tools and materials: high-pressure air gun, soft brush, microfiber cloth, special cleaning agent, protective materials (such as plastic cloth).
Select a site: Make sure the vehicle is parked in a flat, cool place, away from direct sunlight.
Vehicle cooling: The hood cleaning should be done after the vehicle is completely cooled to avoid damage to components due to temperature changes.
II. Cleaning steps
(1) Use a high-pressure air gun to clean dust
High-pressure air guns are the best choice for cleaning dust inside the hood, which can prevent moisture from entering the electrical components and causing short circuits.
(2) Use special cleaning agents to clean stubborn stains
For stubborn stains, use a soft brush dipped in engine-specific cleaning agent to gently scrub.
Avoid excessive cleaning agents from contacting electronic components, such as motors and wiring ports.
(3) Wipe the charging port
Use a slightly damp cloth to wipe the charging port, and avoid directly rinsing the port with water.
(4) External rinsing and drying
The outside of the hood can be rinsed with low-pressure water and wiped dry with a microfiber cloth after cleaning.
It is recommended to use a high-pressure air gun or dry cloth to wipe the inside to prevent moisture from accumulating.
III. Precautions
(1) Protect electrical components
Before cleaning, cover electrical components with plastic sheeting or waterproof material to prevent moisture from penetrating.
(2) Avoid high-pressure water guns
High-pressure water guns may damage wiring and electrical components and should be avoided.
(3) Regular inspection and maintenance
After cleaning, check the status of the hood lock and hinges to ensure normal operation.
IV. Cleaning frequency recommendations
Depending on the use environment and season, it is recommended to clean it every 1-2 months. In dusty or humid areas, the cleaning frequency can be appropriately increased.
Conclusion
When cleaning the hood of an electric vehicle, care and caution are the key. Through reasonable methods, you can keep the hood clean and effectively protect the internal electronic components. The above content is based on the suggestions compiled by major websites to provide you with a more comprehensive cleaning guide to keep your electric vehicle in the best condition!
